Extron SF 26CT

sf26ct
$150.00 each Brand: EXTRONEXTRON

SoundField XD 6.5" Two-Way Ceiling Speaker with 8" Composite Back Can and 70/100 V Transformer
 
Key Features
  • 6.5" (16.5 cm) long throw woofer with a tuned bass reflex enclosure
  • 3/4" (1.9 cm) ferrofluid-cooled dome tweeter
  • 8" (20.3 cm) deep composite back can for plenum environments
  • Frequency range: 65 Hz to 22 kHz
  • 111° conical dispersion
  • 65 watts continuous pink noise, 130 watts continuous program
Audio/acoustic and electrical
   Speaker type  2-way ceiling speaker with composite back can
   Frequency range  65 Hz to 22 kHz, -10 dB, half space (per IEC 60268-5)
   Frequency response  88 Hz to 22 kHz, +/−3dB, half space
   Power capacity  65 W (rms) continuous pink noise
130 W (rms) continuous program
   Rated maximum input voltage (MIV)  22.4 V (62.6 W at 8 ohms) (per AES2-2012)
   Maximum SPL  104 dB, 1 m (based on MIV)
106 dB, 1 m (linear)
   Nominal sensitivity  88 dB SPL, 1W, 1 m, half space
   Nominal impedance  8 ohms per speaker
   Crossover frequency  2.5 kHz
   Nominal coverage angle  111° conical coverage (1 kHz to 4 kHz)
   Drivers   
      Woofer  (1) 6.5" (165 mm) polypropylene cone with moisture resistant coating
      Tweeter  (1) 0.75" (19.1 mm) PEI dome
   Rotary switch taps  70 V: 64 W, 32 W, 16 W, 8 W, 8 ohms direct
100 V: null, 64 W, 32 W, 16 W, 8 ohms direct
   Overload protection  Full range power limiter with the 8 ohm direct input only, protecting the tweeter, woofer, and crossover
   Input connector  (1) 5 mm captive screw connector, 4 pole for 1 input and 1 loop-through
 
General
   Package  2 speakers (1 pair)
   Included accessories  Cutout template/paint shield, setup guide, mounting screws, 4 V-rails, 2 C-rings, 2 round grilles, 2 cable clamps, 2 captive screw connectors
   Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Mounting  Ceiling mountable with included hardware
   Enclosure type  Plenum rated, fire-resistant (UL94V-0) composite back can/baffle;
Magnetically attached powder-coated steel grille with plastic bezel.
   Enclosure outer dimensions  8.34" H x 10.64" diameter
(211.8 mm x 270.3 mm diameter)
8.0" H (203.2 mm H) from front of ceiling tile to back of rear enclosure
   Cutout dimensions  9.3" diameter
(236.2 mm diameter)
   Product weight  9.4 lbs (4.3 kg) each
   Regulatory compliance   
      Safety  CE, UL 2043, UL1480, NFPA 90A, NFPA 70
UL Listed for use in plenum airspaces: 
UL 2043 listed for heat and smoke release,
UL 1480 listed for commercial and professional audio systems
      Environmental  RoHS, WEEE
   
    NOTE     All nominal levels are at ±10%.

tax

MC

norton safe web

visa

GD SSL