Crown MA2402 amp-1001

$850.00 each Weight: 65 lb
Width: 20 in
Length: 16 in
Height: 3.5 in
Brand: CrownCrown

2 items in stock

Product Highlights

  • THX-Certified
  • 520 Watts @ 8 ohm Per Channel
  • Ultra-Low Distortion
  • ODEP Protection
  • PIP2 Compatible
  • Patented Circuitry
  • Multiple Inputs/Versatile Outputs
  • Selectable Output Modes
  • Selectable Sensitivities
  • Level Controls

Crown Audio MA-2402 specs

Power Rating Ratings @ 1kHz
1050W @ 2Ω Stereo (per channel)
800W @ 4Ω Stereo (per channel)
520W @ 8Ω Stereo (per channel)
2070W @ 4Ω Bridged-Mono
1585W @ 8Ω Bridged-Mono

Ratings @ 20Hz-20kHz
850W @ 2Ω Stereo (per channel)
750 W @ 4Ω Stereo (per channel)
505W @ 8Ω Stereo (per channel)
1670W @ 4Ω Bridged-Mono
1485W @ 8Ω Bridged-Mono

Damping Factor Greater than 1000 from 10Hz to 400Hz
Input Sensitivity 0.775 volts or 1.4 volts for Standard 1kHz Power, or a 26dB Voltage Gain (Switchable)
Input Impedance 20 k ohms, Balanced
10 k ohms, Unbalanced
Gain 26dB
Frequency Response 0.1dB @ 20Hz - 20kHz @ 1 watt
Signal-to-Noise Ratio Better than 105dB Below Rated Full Bandwidth Power (A-Weighted)
Total Harmonic Distortion (THD) Less than 0.05%
Input Connections 2 x Balanced 1/4" (6.3mm) Phone Jacks
2 x Balanced XLR Female Jacks
(All Inputs Located on Factory-Installed PIP2-FXQ)
Output Connectors 2 x Sets of Color-Coded 5-Way Binding Posts for Banana Plugs, Spade Lugs, or Bare Wire
Controls Front Panel 1 x On/Off Button
2 x Detented Level Controls
Controls (Rear) 1 x 3-Way Switch for Stereo, Bridge-Mono, and Parallel Mono Modes
1 x 3-Way Sensitivity Selector Switch
1 x Reset Button
1 x Ground-Lift Switch
Indicators Front Panel LEDs for Power, Output Signal, and ODEP
Cooling Internal Heat Sinks with Forced-Air Cooling
Power Consumption 100W or Less While Idle
Power Requirements 120 VAC, 60 Hz
Dimensions 19 x 3.5 x 16" (483 x 89 x 406 mm)
Weight 51.8 lbs (23.5kg)


norton safe web